UDPIH via Raspberry Pi Pico

• Download the latest udpih.uf2 from the releases page.
• Hold down the BOOTSEL button on the board and connect the Pico to your PC.
  Your PC will detect the Pi as a storage device.
• Copy the .uf2 file to the Pico. It will disconnect after a few seconds.

The Pico is now flashed and can be used for udpih. You can now follow the below instructions:

➡️ Booting the recovery_menu.

Credits

USB Descriptor Parsing Is Hard (UDPIH) is by GaryOderNichts, and the write-up on how it works can be found here.

These instructions are modified from the udpih project page.